Tuesday, April 24, 2012

DIY String Chandelier

Hello everybody! I'm excited to share this next project with you. Of course, it's all over Pinterest (how boring my life would be without that website!). I've always liked the look of them, and I thought a lighted one would be great in my new room. 

^Current room


From what I've heard, string/yarn 'chandeliers' (most aren't actually lighted) have been around for several years (my grandma used to make them! Hi Grandma!). 

Most of the tutorials I saw for these chandeliers used string/yarn wrapped around normal balloons, but I wasn't really a fan of the "oblong" shape you get from balloons. Then I saw this: 

A bouncy ball?! How great! The instructions for the above chandelier required tacky glue, which I didn't have, so I combined it with another tutorial to get my results. Here's my version!

1 plastic inflated bouncy ball, any size (mine is 14" in diameter)
Any kind of string or yarn (you can use hemp, yarn, even thread - I used Red Heart Crochet Thread from Walmart, about $2-3 for 1000 yds)
School glue, approx. 4 ounces
Corn starch, 1/2 cup
Water, 1/4 cup
Plastic container
Paper towels and/or rubber gloves (this is messy!)
Lighting kit (I got mine at Pier 1 for about $10)
Ball inflating needle
Drop cloth or trash bag

First, lay out your drop cloth. You may also want a pole or hook to hang your ball from. This is what I started out with:

My intention was to tape a string to the ball, and tie the string to the pole. After trying several methods (scotch tape with string, duct tape with string, duct-taping the ball to the pole, etc.), I figured out that what worked best for me was just to hold the ball in my lap. Sure, I got rather messy, but it was so much easier!

Next, draw a circle with your Sharpie around the, um, inflating hole? This is going to be the opening in your chandelier, through which you'll insert your light source. Make it AT LEAST 2.5" in diameter - larger, if your lightbulb/hardware requires it.

I drew a slightly larger circle around my 2.5" circle for good measure. (Don't mind the rectangle.) 

Remember, this hole is where your light will go. DO NOT cover it with your yarn/string.

In a disposable plastic container, mix your cornstarch and water (don't worry about mixing it too well, it won't become smooth and creamy no matter how long you stir it!). Then start adding glue until you get the desired thickness. Mine was like a thick soup; it could've been thicker though. You want it thin enough to stir easily, but the more runny it is, the more messy!

I couldn't really take any pictures of this step, as both my hands were quite messy. 

First, I dipped my fingers in the glue/cornstarch mixture and coat a good length of the string with it. Then, placing the end of my string along the circle I drew, I started wrapping. You can really wrap any way you want, but here's what helped me:

- Like I said earlier, I held the ball in my lap so I would have the most control over it. If you use this method, try to let the mixture-covered string dry on the ball before you turn it. With this mixture, it should dry pretty quickly.

- Avoid clumps of glue/cornstarch! Unless, of course, you like the slightly imperfect look (my mom does). I was fairly messy with my wrapping and dripping because on all the other tutorials, the writers said the globs of glue would just "flake off". Mine did not. I had to break most of them off with pointy objects...not so fun.

- Once you start getting your ball well covered and you're wondering how much more to do, check to see if there are any large openings in the yarn, where you can see more than 1/2 square inch of the ball. Wrap your string around so that it intersects those openings; this will make the structure stronger.

- REMEMBER, do NOT let string inside your drawn circle. DO make sure the string touches the edges of the circle on all sides though.

Continue wrapping until you deem your ball as covered as you wish, then wrap your string up towards the circle opening, snip it with the scissors, and tuck the end away, nice and hidden.

If your chandelier-in-progress has been hanging as you've been working on it, great - leave it hanging for at least twenty-four hours. If not, prop it on something so that it will not tip over, making sure nothing is touching any part of the string. For me, that something was a very small Toy Story cup.


Hum de dum............

Deflate & Remove
After your twenty four hours are up, it's deflatin' time!

Get your inflating needle and poke it into the hole in your ball. 

You should hear the air hissing out at first; after a while, though, it's likely to stop deflating on its own. Here's the tricky part.

If you don't have a bone for an arm like I do, get someone who does, who can stick their hand in the opening and squeeze the air out of the ball. 

If your ball is like mine, it will not easily come out of the chandelier, even when the air has been squeezed out. I actually had to wrap rubber bands around the ball, using one hand in the chandelier and a few fingers poking in from outside, to make it into a tube that would be able to be pulled out of the hole. 


Oh dear. This was my least favorite part. I had to improvise, as I could find nothing online as to how anyone else had installed lights in their chandeliers. What I came up with is a bit silly, but hey, it works!

(If anyone has a better idea, please let me know!)

Aaaaand you're done!

Now everyone, go make your own! :)

Read More......

Pin It!

Saturday, April 21, 2012

Busy, busy.

Wow! It has been a bit, hasn't it? Well, I've been thiiiiiis close to posting this last week, but you know, things happen...I've been doing a lot in the last week, including searching for a car - which, by the way, could probably be used as a form of torture. UGH!

I did make a dress between now and my last post! I've been putting off writing about it though, because I wanted to get THE perfect picture of it. Something perfectly clear with a crisp white background? Eh, yeahhh...no. Not happening anytime soon! Here's a picture I took right after I finished it:

(That shirt underneath is just what I had on at the moment, I just needed something under there, heh :P)

Yesterday, my boyfriend, my sister, and I went up to my new room and painted it! Yea! Here's a picture of before...

And you'll just have to wait to see the after :)

Don't you love that carpet? :D and those windows are pretty funky too, eh?

More pictures to come. Also to come:

- Tip on hemming stretch knits

- Button bracelet giveaway!

- 10 minute headband tutorial

- Yarn-chandelier-with-bouncy-ball tutorial

I'm doing this today! Can't wait!

Buhbye <3

Read More......

Pin It!

Sunday, April 1, 2012


It's Sunday! What a lovely day for a craft. My particular craft today involved a wonderful amount of RED

Since I'm moving out and going to be cooking for myself, I figured I should start growing myself some herbs. I looooove fresh herbs! They make food come alive! So, my mom and I got some seed packets the other day - thyme, chives, rosemary, cilantro, dill, and some lavender (ees for fun). I'll also be stealing a bit of my mom's basil and oregano plants. I sure hope I have her green thumb, there are a lot of little plant lives resting on my shoulders!

Of course, any good herb garden must have a lovely little planter to hold it. My mom had this old, slightly yellowed planter, with an interesting carved design. 

It actually wasn't too bad the way it was, but I figured I'd give it new life with (what else) paint! I found a can of red spray paint in the garage, washed my precious planter thoroughly, and away I went. 

First things first, setting up my spray station.

I used a garbage bag I found in the garage and several bricks and rocks, and laid them out in an unimportant part of our lawn (yes, we do have an abundance of dandelions).

Three bricks stacked on top of each other was enough to keep the main box of the planter up off the plastic when turned upside down, and one brick held up the drainage tray. This helped me to get at the top edges and kept the paint on the planter from sticking to the plastic.

Then the painting began.

I first sprayed the outside of each piece, using several layers to get into all the little crannies, and then the top of the tray. I also wanted to paint the inside of the main box - but not the whole thing, because my mom wasn't sure how the paint would affect the soil. So I used painters tape to create a rough border along the inside of the box, and mostly covered the rest of the inside with more painters tape and paper. 

(I had to relocate to the garage because of all the wind!)

A little spray paint on the exposed area will continue the red to the inside, and the dirt will cover up the rest. 

Give it a few hours to dry, and....VIOLA! 

A snazzy new planter for some de-lishus future herbs.

I also made this nifty bracelet yesterday!

Thank you Pinterest!

Let me know what you think below :) Danke!

Read More......

Pin It!